Dye Sublimation Printing Explained
Definition
In dye sublimation the image is first printed in specialised dye onto transfer paper. Heat and pressure then take that dye straight from solid to gas, so it penetrates polyester fibres or a polymer coating and sets inside them. Nothing is left sitting on the surface, which means there is no layer that can crack, peel or wear away. The colour becomes part of the material.
How it works
- Artwork prep — designed in CMYK, mirrored, and sized with bleed for all-over prints.
- Printing — sublimation dyes are printed onto coated transfer paper.
- Positioning — the paper is taped to the polyester substrate to prevent any movement during pressing.
- Pressing — heat-pressed at roughly 190–205 °C for 30–60 seconds. The dye sublimates from solid to gas.
- Fibre bonding — the polyester fibres open under heat, the gas enters, and the fibres close around it as they cool.
- Paper removal — the spent transfer paper is removed immediately to prevent ghosting.
- For cut-and-sew all-over prints — the fabric roll is printed and pressed first, then cut and sewn into the finished garment.
Best used for
- Sports jerseys, cycling kit, esports and team apparel
- All-over and edge-to-edge prints with no white border
- Photographic images, gradients and complex full-colour artwork
- Hard goods with a polymer coating: mugs, coasters, phone cases, mousepads, keyrings, photo panels, name badges
- Lanyards, flags, banners, table throws and soft signage
- Any application where a soft, zero-hand finish is required
- Items needing individual personalisation at no setup penalty
Not suitable for
- Cotton or any natural fibre — the dye has nothing to bond to and simply washes out
- Dark or coloured garments — sublimation dye is translucent and cannot print white or light colours onto a dark base
- Uncoated hard substrates — mugs and metals need a polymer coating
- Blends below roughly 65% polyester — colour will look washed out
- Heat-sensitive materials that cannot survive ~200 °C
- Exact Pantone matching on brand-critical colours
Compatible materials
| Material | Works | Notes |
|---|---|---|
| 100% polyester, white/light | Excellent | The ideal substrate |
| Poly blends 65%+ | Good | Vintage/faded look; colour intensity drops with poly content |
| Poly blends under 65% | Poor | Not recommended |
| 100% cotton | Does not work | No bonding site — washes out |
| Polymer-coated ceramic (mugs) | Excellent | Requires sublimation-grade coating |
| Polymer-coated metal | Excellent | Very vivid, very durable |
| Coated acrylic / MDF / hardboard | Excellent | Coasters, plaques, photo panels |
| Dark garments of any fibre | Does not work | Cannot print white |
| Uncoated glass, wood, stone | Does not work | Use UV printing or laser engraving |
Colour capability
Full CMYK with excellent gradient and photographic reproduction. Colour intensity is outstanding on white polyester and on polymer-coated hard goods. There is no white ink — anything intended to appear white is simply the unprinted substrate, which is why a white or very light base is mandatory. Pantone matching is approximate; sublimation colours often shift slightly between screen, proof and final because the dye develops under heat. Always proof brand-critical colours on the actual substrate.
Order quantities
- Practical minimum: 1 piece (hard goods and cut-panel apparel)
- Economic sweet spot: 1–500 for hard goods; 25+ for cut-and-sew apparel
- Practical maximum: unlimited
Sublimation has no screen or plate setup, so single pieces are viable. Cut-and-sew all-over apparel carries a pattern/marker setup and a higher practical minimum because the garment is manufactured, not decorated.
Size and imprint limits
For hard goods, limited by press platen size. For apparel, cut-and-sew allows genuine edge-to-edge coverage on every panel with no size limit — the fabric is printed on the roll before assembly. Panel-printed garments (pressing onto a finished shirt) are limited to platen size and cannot print across seams cleanly.
Durability
The best of any decoration technique. Because the dye lives inside the fibre or coating, it cannot crack, peel or wear off. Colour is effectively permanent for the life of the garment under normal washing. The only real failure mode is UV fading over long outdoor exposure, and on hard goods, damage to the coating itself. Dishwasher performance on mugs depends entirely on coating quality.
Artwork requirements
| Requirement | Spec |
|---|---|
| Preferred format | High-resolution PDF, TIFF, PNG, or vector AI/EPS |
| Resolution | 150 DPI minimum for large format; 300 DPI for apparel and hard goods |
| Colour mode | CMYK, with an ICC profile for the substrate if available |
| Mirroring | Handled in production — supply unmirrored |
| Bleed | 10–20 mm on all-over prints; more on cut-and-sew |
| White areas | Must be genuinely unprinted — no white fill |
| Seam allowance | Keep critical detail away from seams and cut lines |
Setup requirements
None for hard goods and panel prints. Cut-and-sew all-over garments require pattern and marker setup, plus a fabric-strike-off proof on the first run of any new design — that strike-off is the setup cost.
Indicative lead time
Indicative only. Confirm every job with production before committing to a date.
| Stage | Hard goods 1–100 | Apparel panel 25–150 | Cut-and-sew 50–500 |
|---|---|---|---|
| Brief and artwork check | Same day | Same day | 1 day |
| Digital proof | Same day | Same day | 1–2 days |
| Strike-off / physical sample | n/a | n/a | 3–5 days |
| Customer approval | customer-dependent | customer-dependent | customer-dependent |
| Production | 1–2 days | 2–4 days | 8–15 days |
| QC and pack | Same day | 1 day | 2 days |
| Total after approval | 1–3 working days | 3–6 working days | 12–20 working days |
Cut-and-sew is a manufacturing lead time, not a decoration lead time. Set that expectation early — it is the most common source of disappointment on team kit.
Finish and feel
Zero hand. You cannot feel the print at all, because there is nothing sitting on the surface. The fabric retains its original drape, breathability and stretch completely — which is precisely why it dominates sportswear. On hard goods the finish is glossy or matte depending on the coating.
Common defects and how to avoid them
| Defect | Cause | Prevention |
|---|---|---|
| Ghosting (blurred double image) | Paper shifted during press or on removal | Tape the paper; lift cleanly in one motion |
| Washed-out colour | Polyester content too low, or under-pressing | Check fabric spec; verify time and temperature |
| Scorching / yellowing | Temperature too high or dwell too long | Reduce temperature; use protective paper |
| Press marks / shine lines | Platen edge pressing into the fabric | Use a foam pad or oversized platen |
| Uneven colour on hard goods | Poor contact or inconsistent coating | Check jig fit; reject poorly coated blanks |
| White creases in the print | Fabric folded during pressing | Pre-press to remove moisture and flatten |
| Colour shift from proof | Dye develops under heat | Always proof on the actual substrate |
Cost drivers and break-even
Driven by substrate cost, print area and press time — not colour count. Hard-goods cost is dominated by the blank itself. Cut-and-sew cost is dominated by garment manufacturing, not by printing. Sublimation has almost no volume-driven setup advantage, so unit cost stays relatively flat across quantities — which makes it excellent for small runs and less competitive against screen printing at very high volume on simple artwork.
Compared with alternatives
vs DTF — sublimation has zero hand and permanent durability, but is restricted to light polyester. DTF covers cotton, blends and dark garments. If the garment is not light polyester, the answer is DTF.
vs Screen printing — sublimation handles photographic all-over designs that screen printing cannot touch economically, but cannot print on cotton or dark fabric and cannot match a Pantone precisely.
vs UV printing — both decorate hard goods. UV printing works on uncoated surfaces and can print white and build texture; sublimation needs a polymer coating but gives a smoother, more integrated, more scratch-resistant result.
In Australia and New Zealand
Seasonality is worth planning around in Australia and New Zealand. Southern hemisphere sporting calendars run opposite to the northern hemisphere, so winter-code team kit is generally specified in spring for delivery before a pre-season start, while summer codes are ordered late in the year. Cut-and-sew sublimated kit is manufacturing rather than decoration, so its timeline has to be booked against the season rather than the order date.
FAQs
Can you sublimate onto cotton?
No. Sublimation dye bonds only with polyester or a polymer coating. On cotton it will look acceptable at first and then wash straight out.
Why can’t you sublimate dark shirts?
Sublimation ink is translucent and there is no white ink in the process. Colours printed onto a dark base disappear into it. For dark garments, use DTF.
Will a sublimation print crack or peel?
No. The dye is inside the fibre rather than on top of it, so there is no layer to crack or peel. It is the most durable apparel decoration available.
What is an all-over print?
A design that covers the entire garment edge to edge, including across seams. It is achieved by printing the fabric before the garment is cut and sewn, which is why lead times are longer.
Why do sublimation mugs cost more than plain ones?
They carry a polymer coating that the dye bonds to. An uncoated mug cannot be sublimated at all.
How close will the colour be to my brand colour?
Close, but not exact. Sublimation is a CMYK process and the dye develops under heat, so we always recommend a physical proof on the actual substrate for brand-critical colours.
Can every jersey have a different name and number?
Yes, at no setup penalty. That is one of sublimation’s key advantages for team kit.
How long does team kit take?
Cut-and-sew is manufacturing, not decoration — typically 12–20 working days after approval. Plan team kit well ahead of the season.
When should an Australian or New Zealand club order sublimated team kit?
Work back from the first fixture, not from the order date. Cut-and-sew kit is manufactured to order, so the indicative band on this page is measured from artwork approval and sits well before a season start. For winter codes that usually means specifying kit in spring.
Can sublimation be used on the cotton tees most commonly stocked here?
No. Sublimation dye bonds only to polyester or to a polymer-coated surface, so a cotton or cotton-rich garment is not a candidate regardless of colour. For cotton, DTF or screen printing is the correct method.
Last reviewed: 13/09/2026 · Owner: Lenny Ferreira · Confidence: industry standard (awaiting verified Printshop4me production data) · Version: 1.0
