Bleed in Printing

Short definition

Bleed is the strip of artwork that carries on past the line where the printed piece will be cut, 3 mm in most cases, so that any small wander in the guillotine still cuts through colour rather than leaving a white edge.

Expanded explanation

Printed sheets are guillotined in stacks, and stacks shift very slightly. A fraction of a millimetre of movement is normal and unavoidable. If a background colour stops exactly at the trim line, that movement produces a thin white sliver along one edge — which is immediately obvious and ruins the piece.

Bleed solves it by extending any element that touches the edge past the trim line, so the blade always cuts through colour rather than along its boundary. The excess is cut away and discarded.

Three related measurements appear on a correctly prepared file:

  • Bleed — 3 mm beyond the trim line (5 mm on larger formats and packaging)
  • Trim line — where the piece will actually be cut
  • Safe area — 3–5 mm inside the trim, where all critical content must sit

That last one gets overlooked most often. Text placed right at the trim line will survive the cut, but will look uncomfortably tight on the finished piece and may sit visibly closer to one edge than the other.

Bleed applies to trimmed print — business cards, flyers, brochures, packaging, labels. It is not needed for printing onto an existing object, such as a garment or a promotional item, because nothing is being cut.

Where you’ll encounter it

In every print file specification, and as a preflight rejection reason when a supplied PDF has no bleed.

Also known as

Print bleed, bleed area, full bleed.

Related terms

Crop marks · safe area · trim line · imposition

Related service

Commercial printing.


Last reviewed: 13/09/2026 · Owner: Lenny Ferreira · Confidence: industry standard · Version: 1.0